Ebay specials

Universal brake and gear cables with stainless steel inner wires which can be cut to length. For front or rear brakes and front or rear gears.

Universal Brake Cable

• Stainless steel inner wire
• Barrel and Pear nipple, for Road or MTB/Hybrid
• 2100mm Length 2P brake outer casing
• Brake cable supplied with 2 end ferrules pre-fitted 

Universal Gear Cable

• Stainless steel inner wire
• 2000mm length inner wire
• 1500mm Length SP4 gear outer casing
• Gear cable supplied with 6 x extra nylon ferrules (2 pre-fitted)
• Compatible with all major gear systems

Our standard chains are  available in 6 sizes - single speed, 5-7 speed, 8 speed Anti Rust, 9 speed, 10 speed and 11 speed. A solid performer, this chain offers the rider good value for money.

Features:

• Single speed chain - ideal for BMX and fixed gear bikes
  
• 5-11 speed chains suitable for MTB, Road and Hybrid bikes
• Compatible with all major manufacturers components
  
• Good value for money chain
  
• Quick link connector
• 112 (single) - 116 Links (all other chains)

These are brand new genuine Clarks cables, in their packaging. They are a universal fit. Simply remove the end that is not compatible with your bike. 

MTB front brake cable.

• 2P Outer casing, galvanised inner wire. 
• Ample length for all bikes front brakes
• Pear and barrel nipple, for all Road, MTB and hybrid bikes
• NB. This cable is too short for mechanical calliper front brakes

MTB rear brake cable.

• 2P Outer casing, galvanised inner wire. 
• 2100mm length cable, ample for rear brakes
  
• Pear and barrel nipple, for all Road MTB and hybrid bikes

These are brand new genuine Clarks cables, in their packaging. They are a universal fit. Simply remove the end that is not compatible with your bike. 

Road and Hybrid front brake cable.

• 2P Outer casing, galvanised inner wire. 
• Ample length for all bikes front brakes
• Pear and barrel nipple, for all Road, MTB and hybrid bikes
• NB. This cable is too short for mechanical calliper front brakes

Road and Hybrid rear brake cable.

• 2P Outer casing, galvanised inner wire. 
• 2100mm length cable, ample for rear brakes
  
• Pear and barrel nipple, for all Road MTB and hybrid bikes

Improved version with upgraded rotors - the 2024 set is supplied with rotors that are stronger and tested to a higher standard for use with higher powered e-bikes.

The CLOUT1  hydraulic brake system has the capability of a much higher end brake in the market, providing the rider with greater power, consistency and feel, all at a price that is designed to compete with entry level bikes. CLOUT1 maintains superb quality and reliability even at this lower price point. The CLOUT1 mineral oil brake features a 2 piston calliper and small well designed lever assembly with reach adjustment.

All brakes are supplied with rotors, bolts, hoses (fitted) and pads.

Features:

• Lightweight brake system with stainless steel rotors
• 2 piston hydraulic brake
• International standard and Post mount fit
• Mineral oil fluid
• Lever reach adjustment
• Available with 160/160mm or 180/160mm rotors
• Weight - 419g
• Approved to and exceeds BS EN 14766-2005 and ISO4210

This set comes with the hoses connected, filled with mineral fluid and pre-bled. All ready to fit straight onto your bike. It also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 800mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, using 3/4 day tracked delivery service.

Replacement rotor (CL027-160 / 180)
Replacement disc pads (VRX811)

We have a 180mm rotor and front calliper upgrade set available for 160/160 sets- visit our shop for more information.

Clarks Organic/Resin disc brake pads are all supplied with sprint clips where applicable. 

Organic/Resin compound provide sharp breaking without the requirement to 'warm up', or bed in. Offering the rider with quiet, smooth braking these are great replacement pads, that perform equally as well in the wet, as they do in dry conditions. 

Most pads have a very distinctive shape, if you are not sure which pad you need, check your calliper for a code reference, then refer to our guides.

The most popular pads types [and commonly used across Shimano, Tektro and Clarks models] are the VX811 and the VX852 (Shimano code ref BO1S or GO1S)

Please message us if you are not sure and we will steer you in the right direction

Brake and gear inner wires for Road, MTB and Hybrid Bikes.

Brake wire:
Double ended (Barrel Nipple/Pear Nipple). Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths of 2000mm, long enough front and rear brakes on all types of bikes.

• Available in singles or as pairs (bike set)
• 2000mm length
  
• Universal, pear and barrel nipple
• Fits all cycle types - Road, MTB and Hybrid

Gear Wire:
Universal fit steel gear wire. Compatible with all manufacturers gear systems.

• Available in singles or as pairs (bike set)
• 2175mm length
  
• Fits all cycle types - Road, MTB and Hybrid
  

Genuine Clarks Stainless steel brake and gear inner wires for Road and MTB/Hybrid bikes. Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths long enough for front and rear brakes and gears on all types of bikes.

Brake wires for Road have a Pear Nipple, Brake wires for MTB/Hybrid Bikes have a Barrel Nipple. 

• Stainless Steel inner wires
• Stainless Steel gear wires with PTFE coating for more accurate indexing
• Suitable for all road and MTB bikes
• Gear wires 2275mm long
• Brake wires 2000mm long
• Genuine Clarks Stainless Steel inner wires

Genuine Clarks Stainless steel gear inner wires for Road and MTB/Hybrid bikes. Compatible with all major manufacturers gear systems. All inner wires are supplied in generous lengths long enough for front and rear gears on all types of bikes.

• Available in singles or as Bike Sets of 2 wires
• Stainless Steel gear wires
• Gear wires 2275mm long
• Genuine Clarks Stainless Steel inner wires
  

You are buying a set of Clarks V Brake levers with a replacement set of brake cables.

Clarks Die cast V-brake levers are ergonomically designed to be comfortable to use, and compatible with twist and thumb gear shifters.

• Die cast alloy construction
• Compatible with both U and V brake callipers
• Flip Flop design
• Hinged clamp for easy installation
• Integrated cable adjusters

2 x Cables
Universal cables for MTB, Hybrid and Kids bikes.

• 2P outer casing
• 2 x Cables 2100mm in length

Clarks die cast alloy V Brake calliper, ideal for MTB and Hybrid cycles as a replacement or upgrade component. Supplied with Clarks  pads, these callipers are of a high quality and very easy to fit.

You are purchasing 1 pair of Clarks V-Brake Callipers with pads

Features:

• Die cast alloy
• Pads supplied
  
• Includes guide pipe and noodle 
• Black Alloy

2 Pairs of pads (1 x bike set)

Available in 2 choices of compound:

Sintered cycle disc brake pads
Clarks sintered cycle disc brake pads use harder compound pad with increased carbon content. Sintered pads are designed to deliver maximum performance under stress and extreme conditions. Consistent through sustained riding they are ideal for hydraulic brake systems.

Organic cycle disc brake pads
Clarks organic cycle disc brake pads are specifically designed to give the best performance under normal conditions. The organic compound gives improved noise reduction as well as increased ‘bite’. Recommended for use with Mechanical Systems.

Model Compatibility:

Please note if you are purchasing for a Clarks M2, check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

Supplied with spring clips where applicable

2 Pairs of pads - 1 x bike set

Sintered cycle disc brake pads
Clarks sintered cycle disc brake pads use harder compound pad with increased carbon content. Sintered pads are designed to deliver maximum performance under stress and extreme conditions. Consistent through sustained riding they are ideal for hydraulic brake systems.

Model Compatibility:

Please note if you are purchasing for a Clarks M2, check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

Supplied with spring clips where applicable

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casings and hydraulic hose.

Content:

• SP4 or SP5 Gear outer casing
• 30 metres in length
  
• Black
  

SP4 is 4mm standard diameter gear casing
SP5 is 5mm diameter, commonly used on 3 speed sturmey archer, and similar, hub gears

• Genuine Clarks alloy gear and brake wire end covers
• Silver coloured
  
• Available in packs of 20, 50, 100 or 500
• 500 units in a dispenser pot.

The Clarks CMD-23 mechanical brake is suitable for use with Road / Hybrid / MTB Bikes and E-Bikes,  the all alloy construction callipers use a larger pad to provide greater stopping power that similar models. Built in pad adjustment that will ensure simple set up and continuous braking performance.

The CMD-23 is Clarks top performing single piston brake set. Featuring larger pads for better braking performance and improved quality of finish

Supplied in a full bike set which includes front and rear callipers, semi-metallic brake pads with lightweight rotors, stainless steel cables, bolts and brackets.

Features:

• Compatible with Hybrid and MTB bikes
  
• Larger pads provide increased stopping power
• 2 x Organic pads
• IS & PM compatible
• Single piece calliper design
• Easy pad adjustment
• Integrated cable tensioner
• Supplied with 160mm front and 160mm rear rotors
• 2 x Brake cables

CMD-23's require VX/VRX811 replacement pads

Approved to BS EN 14766-2005 and ISO4210

This set comes with 2 x 160mm rotors, bolts and calliper brackets and 2 x brake cables

90 Degree guide pipe and brake inner wire.

For V brakes, MTB and Hybrid Bikes. Double ended (Barrel Nipple/Pear Nipple). Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths of 2000mm, long enough front and rear brakes on all types of bikes.

• Available in singles or as pairs (bike set)
• 2000mm length
  
• Universal, pear and barrel nipple
• Fits all cycle types - Road, MTB and Hybrid

90 Degree guide pipe.

Alloy guide pipe supplied with noodle/rubber bellows.

Brake inner wire for Road, MTB and Hybrid Bikes. Double ended (Barrel Nipple/Pear Nipple). Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths of 2000mm, long enough front and rear brakes on all types of bikes.

• Available in singles or as pairs (bike set)
• 2000mm length
  
• Universal, pear and barrel nipple
• Fits all cycle types - Road, MTB and Hybrid

Improved version with upgraded rotors - the 2024 set is supplied with rotors that are stronger and tested to a higher standard for use with higher powered e-bikes.

The CLOUT1  hydraulic brake system has the capability of a much higher end brake in the market, providing the rider with greater power, consistency and feel, all at a price that is designed to compete with entry level bikes. CLOUT1 maintains superb quality and reliability even at this lower price point. The CLOUT1 mineral oil brake features a 2 piston calliper and small well designed lever assembly with reach adjustment.

All brakes are supplied with rotors, bolts, hoses (fitted) and pads.

Features:

• Lightweight brake system with stainless steel rotors
• 2 piston hydraulic brake
• International standard and Post mount fit
• Mineral oil fluid
• Lever reach adjustment
• Available with 160/160mm or 180/160mm rotors
• Weight - 419g
• Approved to and exceeds BS EN 14766-2005 and ISO4210

This set comes with the hoses connected, filled with mineral fluid and pre-bled. All ready to fit straight onto your bike. It also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 800mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, using 3/4 day tracked delivery service.

Replacement rotor (CL027-160 / 180)
Replacement disc pads (VRX811)

We have a 180mm rotor and front calliper upgrade set available for 160/160 sets- visit our shop for more information.

Comfortable ladies / mens saddle, with extra deep padding moulded onto a rigid base. Designed specifically to help you stay in the saddle longer without experiencing discomfort. This saddle has rubber 'shock absorbers' between the strong metal frame and the base cushions some of the impact of rougher tracks and roads.

Ideally suited to Trek bikes, Hybrid bikes and MTB bikes this saddle comes with an adjustable universal fitting bracket.

Features

• Rigid plastic base and strong metal rails
• Deep padding
• Rubber 'shock absorber' to help cushion against rough roads
  
• Hardwearing black PU covering
  
• Adjustable universal mounting bracket

You are buying a set of Clarks V Brake levers with a replacement set of front and rear brake cables.

Clarks Die cast V-brake levers are ergonomically designed to be comfortable to use, and compatible with twist and thumb gear shifters.

• Die cast alloy construction
• Compatible with both U and V brake callipers
• Flip Flop design
• Hinged clamp for easy installation
• Integrated cable adjusters

Stainless steel brake cable kit
Universal cables for MTB, Hybrid and Kids bikes.

• 2P Outer casing
• 2 x Stainless steel brake wires with pear and barrel nipples
• 6 x Nylon push fit ferrules
• 2 x wire end covers
• 2 x Rubber doughnuts
• Red
  

The award winning M2 has been designed specifically for the cycle enthusiast. It brings high level performance and braking power to the MTB and hybrid rider, at an entry level price. The twin piston callipers of the M2 deliver superb braking performance in all weather conditions. Supported by a sleek and compact lever design, this braking system will provide exceptional reliability and consistent performance.

Features:

• Lightweight award winning hydraulic disc brake set
• 2 Piston hydraulic brake calliper
  
• Mineral oil fluid
  
• Post mount calliper & international standard compatible
• Lever reach adjustment
  
• Weight 388g

• Approved to BS EN 14766-2005 and ISO4210

This set comes with the hoses connected, filled with mineral fluid and pre-bled. All ready to fit straight onto your bike. It also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 700mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, using a 2/3 day delivery service.

Replacement rotor (CL-160)
Replacement disc pads (VRX852 or VRX811)

Please note check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

We have a 180mm rotor and front calliper upgrade set available for 160/160 sets- visit our shop for more information.

Please note the M2's do not come with an automatic motor shut off sensor

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Gear wire
  
• Galvanised steel
  
• Tube nipple, MTB/Hybrid/Road
• 2275mm in length
  
• 100 wires per box

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casings and hydraulic hose.

Content:

• 2P Brake casing
• 30 metres in length
  
• Black
  

The Clarks CMD-23 mechanical brake is suitable for use with Road / Hybrid / MTB Bikes and E-Bikes,  the all alloy construction callipers use a larger pad to provide greater stopping power that similar models. Built in pad adjustment that will ensure simple set up and continuous braking performance.

The CMD-23 is Clarks top performing single piston brake set. Featuring larger pads for better braking performance and improved quality of finish

Supplied in a full bike set which includes front and rear callipers, semi-metallic brake pads with lightweight rotors, stainless steel cables, bolts and brackets.

Features:

• Compatible with Hybrid and MTB bikes
  
• Larger pads provide increased stopping power
• 2 x Organic pads
• IS & PM compatible
• Single piece calliper design
• Easy pad adjustment
• Integrated cable tensioner
• Supplied with 160mm front and 160mm rear rotors
• 2 x Stainless steel brake cables

CMD-23's require VX/VRX811 replacement pads

Approved to BS EN 14766-2005 and ISO4210

This set comes with 2 x 160mm rotors, bolts and calliper brackets and 2 x stainless steel brake cables

Clarks die cast alloy V Brake callipers, ideal for MTB and Hybrid cycles as a replacement or upgrade component. Supplied with Clarks 7 pads, these callipers are of a high quality and very easy to fit.

You are purchasing 2 pairs of Clarks V-Brake Callipers with pads

Features:

• Die cast alloy
• Pads supplied
• Black Alloy

Clarks Stainless steel cable kits are high quality tried and tested kits that will provide every cyclist with great value, exceptional performance . 

• Suitable for MTB, Hybrid and Road bikes
• Compatible with all major manufacturers brake systems

Contents

• 2P Outer casing
• 2 x Stainless steel brake wires with pear and barrel nipples
• 6 x Nylon push fit ferrules
• 2 x wire end covers
• 2 x Rubber doughnuts

2 x guide pipes and 2 x inner wires. A bike set.

90 Degree guide pipe and brake inner wires.

For V brakes, MTB and Hybrid Bikes. Double ended (Barrel Nipple/Pear Nipple). Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths of 2000mm, long enough front and rear brakes on all types of bikes.

• Available a (bike set)
• 2000mm length
  
• Universal, pear and barrel nipple
• Fits all cycle types - Road, MTB and Hybrid

90 Degree guide pipes.

Alloy guide pipes supplied with noodle/rubber bellows.

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Gear wire
  
• Stainless Steel,
  
• Tube nipple, MTB/Hybrid/Road
• 2275mm in length
  
• 100 wires per box

This set includes Lock on grips.

In order to remove many cheaper V Brake levers without hinged clamps, grips must be removed from the bars. This often means cutting the grip, so needing a replacement. This set includes replacement Clarks lock on grips

Clarks Complete Die cast V-brake set includes 2 x levers, 2 x calliper sets (front and rear), 2 sets of cables, 2 sets of pads, noodles and all fittings.

Complete replacement/upgrade set of V-brake levers and callipers and grips

Clarks levers are ergonomically designed to be comfortable to use, and compatible with twist and thumb gear shifters. They have a hinged clamp so that the levers can be fitted without the need to replace the grips.

• Die cast alloy construction (no plastic parts)
• Flip Flop lever design
  
• Hinged clamp for easy installation
• Integrated cable adjusters
• Designed for improved braking performance over cheaper sets 
  
• Includes cables, noodles and pads.
• INCLUDES 2x Clarks lock on grips

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Brake wire
  
• Stainless Steel,
  
• Barrel nipple, MTB/Hybrid
• 2100mm in length
  
• 100 wires per box

Brake inner wire for Road, MTB and Hybrid Bikes. Double ended (Barrel Nipple/Pear Nipple). Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths of 2000mm, long enough front and rear brakes on all types of bikes.

• Stainless Steel
• 2000mm length
• Universal, pear and barrel nipple
• Fits all cycle types - Road, MTB and Hybrid

Available in singles, pairs and fours