Workshop

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casings and hydraulic hose.

Content:

• SP4, SP5 Gear or 2P Brake casing
• 30 metres in length
  
• Black
  

SP4 is 4mm standard diameter gear casing
SP5 is 5mm diameter, commonly used on 3 speed sturmey archer, and similar, hub gears

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Gear wire
  
• Die Drawn Stainless Steel, PTFE Coated, Stainless Steel and Galvanised
  
• Tube nipple, MTB/Hybrid/Road
• 2275mm in length
  
• 100 wires per box

 Die Drawn:
Die Drawn wires offer greatly reduced friction between the wire and liner. Drawn wires perform better than any other control cables on the market today. The reduced friction is achieved by micro hammering the surface of the wire to the preferred diameter, this is then inserted into a drawing die and pulled through the draw plate multiple times, further ‘flattening’ the profile of the wire to achieve a continuously smooth surface.

• Anodised nickel plated steel rotor bolts
  
• T25 Torx head
• Supplied with thread lock applied
• Pack of 6
  
• Available in Blue, Gold, Green and Red

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Brake wire
  
• Die Drawn Stainless Steel, Stainless Steel or Galvanised
  
• Barrel nipple, MTB/Hybrid
• 2100mm in length
  
• 100 wires per box

Die Drawn:
Die Drawn wires offer greatly reduced friction between the wire and liner. Drawn wires perform better than any other control cables on the market today. The reduced friction is achieved by micro hammering the surface of the wire to the preferred diameter, this is then inserted into a drawing die and pulled through the draw plate multiple times, further ‘flattening’ the profile of the wire to achieve a continuously smooth surface.

Our range of road brake cycle pads and blocks feature carrier designs that are compatible with all current brake systems as well as some of the less common older manufacturers calliper brakes. All the pads use non-abrasive compounds that will not damage wheel rims, as well as specialist compounds for performance braking surfaces such as carbon rims.

Features:

• Weinmann & Raleigh compatible.
• 35mm X pattern blocks.

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Brake wire
  
• Die Drawn Stainless Steel, Stainless Steel or Galvanised
  
• Pear nipple, Road
• 2100mm in length
  
• 100 wires per box

Die Drawn:
Die Drawn wires offer greatly reduced friction between the wire and liner. Drawn wires perform better than any other control cables on the market today. The reduced friction is achieved by micro hammering the surface of the wire to the preferred diameter, this is then inserted into a drawing die and pulled through the draw plate multiple times, further ‘flattening’ the profile of the wire to achieve a continuously smooth surface.

Our range of MTB and Hybrid cycle pads and brake blocks use compounds that will give consistently high performance braking whilst not damaging wheel rims. Brake pads are compatible with all V-Brake/Cantilever brake systems.

Features:

• 70mm V type cantilever brake blocks
• Threaded post for linear pull brakes
• Pack of 25 pairs

• Wire end covers
• Silver coloured
  
• Available in packs of 10 or 500

• Alloy derailleur hanger
• Aluminium alloy
• includes bolt to fit into frame
• Pack of 1

Easy to install, these split links will allow the chain to be removed and refitted without the need for chain rivet extractors. Designed to be compatible with all major gearing systems, a split link will not impede the operation of a cycle’s drivetrain.

Features:

• Compatible with all major gearing systems
  
• Extremely durable
  
• Easy to fit 
  
• Re-usable
• Available for 9, 10 and 11 speed chains

• V-Brake 90° bend and rubber boot (noodle)
  
• Pack of 1
  

• Steel brake ferrules
  
• 5.5mm
• Packs of 10 or 200
  

• Push fit brake ferrules
• Suitable for 2P housing
• 5mm
• Packs of 10 and 150
  

• V-Brake 135° bend and rubber boot (Noodle)
  
• Pack of 1
  

• Nylon gear ferrules
  
• Push fit 4mm ferrules fit all brands of outer casing
• Available in packs of 10 or 200
  

• Wire end covers
• Anodised
• Packs of 10
  
• Available in black, blue, green & red

• Used to space a disc brake calliper and ensure it is lined up correctly
• 1.6mm x 2.08mm x 4mm
• Pack of 10

• Mudguard stay nuts and bolts
  
• Pack of 4
  

• Allen key crank bolts
  
• M8
• For square taper bottom bracket
• Pack of 2
  

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Hydraulic hose:
Double jacketed Kevlar® fibres over a braided PVDF Polymer underlay, with spiral fibre wrap reinforcement, creates a superior hose with great strength, resistant to impact and expansion.

Content:

• 5mm outer, 2.3mm inner diameter
  
• Shimano compatible
• 30 metres in length
  
• Black
  

• Universal foam frame protectors
  
• Compatible with brake and gear outer casing, SP4 and 2P type as well as braided
• Pack of 2
  

• Universal rubber frame protectors
  
• Compatible with brake and gear outer casing, SP4 and 2P type as well as braided
• Easy fit, split rubber protector, does not need to be 'threaded' onto the cable.
• Pack of 2
  

• Clear brake 'O' rings
  
• Available in packs of 3 or 200
  

• Black brake 'O' rings
  
• Available in packs of 3 or 200
  

• High grade titanium construction
  
• T25 Torx head
• Pack of 6
  
• All 6 bolts - 22g

• M8 x 45mm Allen key bolt
  
• Pack of 1
  

• A Headset star nut - 1 1/8"
  
• Pack of 1
  

• Alloy brake and gear ferrules
  
• Pack of 10
  

• A Headset 5mm spacers
  
• Black anodised
• Pack of 3