Brake and Gear Inner Wires

A complete replacement set of Clarks brake and gear inner wires for Road bikes. Complete with 4 x end caps

All inner wires are supplied in generous lengths of 2275mm, long enough front and rear changers and front and rear brakes on all types of bikes.

• 2 x Road brake wires
• 2 x Gear wires
• 4 x End caps
• Genuine Clarks inner wires

Gear inner wire. Compatible with all major manufacturers gear changers.
All inner wires are supplied in generous lengths of 2275mm, long enough front and rear changers on all types of bikes.

• Teflon / PTFE coated and galvanised.
• PTFE provides the rider with quicker more accurate shifting as the inner wire is virtually friction free.
• PTFE coated wire supplied with black end caps

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casings and hydraulic hose.

Content:

• SP4, SP5 Gear or 2P Brake casing
• 30 metres in length
  
• Black
  

SP4 is 4mm standard diameter gear casing
SP5 is 5mm diameter, commonly used on 3 speed sturmey archer, and similar, hub gears

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Gear wire
  
• Die Drawn Stainless Steel, PTFE Coated, Stainless Steel and Galvanised
  
• Tube nipple, MTB/Hybrid/Road
• 2275mm in length
  
• 100 wires per box

 Die Drawn:
Die Drawn wires offer greatly reduced friction between the wire and liner. Drawn wires perform better than any other control cables on the market today. The reduced friction is achieved by micro hammering the surface of the wire to the preferred diameter, this is then inserted into a drawing die and pulled through the draw plate multiple times, further ‘flattening’ the profile of the wire to achieve a continuously smooth surface.

A replacement set of Clarks brake inner wires for MTB an Hybrid bikes. Complete with 2 x end caps

All inner wires are supplied in generous lengths of 2275mm, long enough for front and rear brakes on all types of MTB bikes.

• 2 x MTB/Hybrid brake wires
• 2 x End caps
  
• Genuine Clarks inner wires

Gear inner wire. Compatible with all major manufacturers gear changers.
All inner wires are supplied in generous lengths of 2275mm, long enough front and rear changers on all types of bikes.

• Available in Stainless Steel, PTFE coated and galvanised.
• PTFE provides the rider with quicker more accurate shifting as the inner wire is virtually friction free.
• PTFE coated wire supplied with black end caps
• Stainless Steel wire is corrosion resistant.

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Brake wire
  
• Die Drawn Stainless Steel, Stainless Steel or Galvanised
  
• Barrel nipple, MTB/Hybrid
• 2100mm in length
  
• 100 wires per box

Die Drawn:
Die Drawn wires offer greatly reduced friction between the wire and liner. Drawn wires perform better than any other control cables on the market today. The reduced friction is achieved by micro hammering the surface of the wire to the preferred diameter, this is then inserted into a drawing die and pulled through the draw plate multiple times, further ‘flattening’ the profile of the wire to achieve a continuously smooth surface.

We carry all the more popular Clarks workshop dispenser boxes, containing inner brake and gear wire, outer casing and hydraulic hose.

Content:

• Brake wire
  
• Die Drawn Stainless Steel, Stainless Steel or Galvanised
  
• Pear nipple, Road
• 2100mm in length
  
• 100 wires per box

Die Drawn:
Die Drawn wires offer greatly reduced friction between the wire and liner. Drawn wires perform better than any other control cables on the market today. The reduced friction is achieved by micro hammering the surface of the wire to the preferred diameter, this is then inserted into a drawing die and pulled through the draw plate multiple times, further ‘flattening’ the profile of the wire to achieve a continuously smooth surface.

Brake inner wire for Road, MTB and Hybrid Bikes. Double ended (Barrel Nipple/Pear Nipple). Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths of 2000mm, long enough front and rear brakes on all types of bikes.

• Available in Stainless Steel and galvanised
• 2000mm length
• Universal, pear and barrel nipple
• Fits all cycle types - Road, MTB and Hybrid

Brake inner wire for MTB/Hybrid Bikes (Barrel Nipple). Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths of 2000mm, long enough front and rear brakes on all types of bikes.

• Stainless Steel inner wire
• Suitable for all MTB and Hybrid bikes

Brake inner wire for Road Bikes (Pear Nipple). Compatible with all major manufacturers brake systems. All inner wires are supplied in generous lengths of 2000mm, long enough front and rear brakes on all types of bikes.

• Stainless Steel inner wire
• Suitable for all road bikes