MTB Specific parts

Improved version with upgraded rotors - the 2024 set is supplied with rotors that are stronger and tested to a higher standard for use with higher powered e-bikes.

The CLOUT1  hydraulic brake system has the capability of a much higher end brake in the market, providing the rider with greater power, consistency and feel, all at a price that is designed to compete with entry level bikes. CLOUT1 maintains superb quality and reliability even at this lower price point. The CLOUT1 mineral oil brake features a 2 piston calliper and small well designed lever assembly with reach adjustment.

All brakes are supplied with rotors, bolts, hoses (fitted) and pads.

Features:

• Lightweight brake system with stainless steel rotors
• 2 piston hydraulic brake
• International standard and Post mount fit
• Mineral oil fluid
• Lever reach adjustment
• Available with 160/160mm or 180/160mm rotors
• Weight - 419g
• Approved to and exceeds BS EN 14766-2005 and ISO4210

This set comes with the hoses connected, filled with mineral fluid and pre-bled. All ready to fit straight onto your bike. It also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 800mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, using 3/4 day tracked delivery service.

Replacement rotor (CL027-160 / 180)
Replacement disc pads (VRX811)

We have a 180mm rotor and front calliper upgrade set available for 160/160 sets- visit our shop for more information.

Available in 2 choices of compound:

Sintered cycle disc brake pads
Clarks sintered cycle disc brake pads use harder compound pad with increased carbon content. Sintered pads are designed to deliver maximum performance under stress and extreme conditions. Consistent through sustained riding they are ideal for hydraulic brake systems.

Organic cycle disc brake pads
Clarks organic cycle disc brake pads are specifically designed to give the best performance under normal conditions. The organic compound gives improved noise reduction as well as increased ‘bite’. Recommended for use with Mechanical Systems.

Model Compatibility:

Please note if you are purchasing for a Clarks M2, check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

Supplied with spring clips where applicable

2 Pairs of pads - 1x bike set

Organic cycle disc brake pads
Organic/Resin compound provide sharp breaking without the requirement to 'warm up', or bed in. Offering the rider with quiet, smooth braking these are great replacement pads, that perform equally as well in the wet, as they do in dry conditions.

Model Compatibility:

Please note if you are purchasing for a Clarks M2, check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

Supplied with spring clips where applicable

The award winning M2 has been designed specifically for the cycle enthusiast. ideal for MTB, Electric and Hybrid Bikes. It brings high level performance and braking power to the MTB and hybrid rider, at an entry level price. The twin piston callipers of the M2 deliver superb braking performance in all weather conditions. Supported by a sleek and compact lever design, this braking system will provide exceptional reliability and consistent performance.

Features:

• Lightweight award winning hydraulic disc brake set
• 2 Piston hydraulic brake calliper
  
• Mineral oil fluid
  
• Post mount calliper & international standard compatible
• Lever reach adjustment
  
• Weight 388g

• Approved to BS EN 14766-2005 and ISO4210

This set comes with the hoses connected, filled with mineral fluid and pre-bled. All ready to fit straight onto your bike. It also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 700mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, on a 2/3 day delivery service.

Replacement rotor (CL-160)
Replacement disc pads (VRX852 or VRX811)

Please note check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

We have a 180mm rotor and front calliper upgrade set available for 160/160 sets- visit our shop for more information.

Please note the M2's do not come with an automatic motor shut off sensor

Specifically designed for purpose, this range of Elite MTB/Hybrid pads and cartridges will ‘wipe’ dirt from the rim whilst delivering top performance braking power and consistency. Using CNC machined carriers combined with lightweight materials our brake pads will compliment all of the top manufacturers braking systems whilst providing great stopping power.

Features:

• For linear pull brakes with threaded posts
  
• Triple compound for good performance in all conditions
• Top performance on dry and wet rims
  

Gear inner wire. Compatible with all major manufacturers gear changers.
All inner wires are supplied in generous lengths of 2275mm, long enough front and rear changers on all types of bikes.

• Teflon / PTFE coated and galvanised.
• PTFE provides the rider with quicker more accurate shifting as the inner wire is virtually friction free.
• PTFE coated wire supplied with black end caps

Specifically designed for purpose, this range of Elite MTB/Hybrid pads and cartridges will ‘wipe’ dirt from the rim whilst delivering top performance braking power and consistency. Using CNC machined carriers combined with lightweight materials our brake pads will compliment all of the top manufacturers braking systems whilst providing great stopping power.

Features:

• Dual compound design 70mm brake pad
  
• For linear pull brakes with threaded posts
• Designed specifically for extreme conditions
  
• Top performance on wet and dry rims

Genuine Clarks Pads - a bike set (2 pairs)

Our range of MTB and Hybrid cycle pads and brake blocks use compounds that will give consistently high performance braking whilst not damaging wheel rims. Brake pads are compatible with all V-Brake/Cantilever brake systems.

Features:

• 70mm V type cantilever brake blocks
• Threaded post for linear pull brakes
• 2 Pairs of pads (1 bike set)

Our range of MTB and Hybrid cycle pads and brake blocks use compounds that will give consistently high performance braking whilst not damaging wheel rims. Brake pads are compatible with all V-Brake/Cantilever brake systems.

Features:

• 70mm XTR upgrade brake blocks
• Threaded post for linear pull brakes
• Includes pair of replacement cartridges

The Clarks M4 (2022 version) is their most powerful brake produced to date. Featuring the revised calliper design with 4 pistons per calliper, it applies more braking force to the rotor than any other Clarks M range of hydraulic brakes. Designed to meet the demands of downhill riders and e-bike riders and commuters who need more stopping power from their brakes. The M4 has a 2 finger ergonomic lever blade with reach adjustment, forged alloy callipers and uses mineral oil fluid.

Features:

• Lightweight hydraulic disc brake set
• Revised calliper design 
• Self adjusting 16mm pistons
• Powerful 4 Piston hydraulic brake calliper
  
• Mineral oil fluid
  
• Post mount calliper & international standard compatible
• 2 Finger lever with reach adjustment
  
• 180mm front rotor, 160mm rear rotor
• 180 post mount bracket included
  
• Weight 242g (rear calliper and lever)

• Approved to BEN 15194 regulations

This set comes with the hoses connected, filled with mineral fluid and pre-bled. All ready to fit straight onto your bike. It also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 800mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, using the Royal Mail first class signed for delivery service.

Replacement rotor (CL-160)
Replacement disc pads (VRX851)

Organic cycle disc brake pads
Organic/Resin compound provide sharp breaking without the requirement to 'warm up', or bed in. Offering the rider with quiet, smooth braking these are great replacement pads, that perform equally as well in the wet, as they do in dry conditions.

Model Compatibility:

Please note if you are purchasing for a Clarks M2, check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

Supplied with spring clips where applicable

Shimano and SRAM compatible, rear cassette, ideal for Hybrid and weekend trail MTB bikes.

Features:

• Compatible with most 10 speed gear systems (excluding Campagnolo)
• Corrosion resistant steel
• Nickel plated for longevity
• Sprocket range - 11t, 13t, 15t, 17t, 19t, 21t, 24t, 28t, 32t, 36t
• Weight: 420g

Shimano compatible, rear cassette, ideal for Hybrid and weekend trail MTB bikes.
Please note that this cassette is compatible with most SRAM gears, please check before purchasing.

Features:

• Compatible with most 11 speed gear systems (excluding Campagnolo)
• Corrosion resistant steel
• Nickel plated for longevity
• Sprocket range - 11t, 13t, 15t, 17t, 19t, 21t, 24t, 28t, 32t, 36t, 42t
• Weight: 539g

Organic cycle disc brake pads
Organic/Resin compound provide sharp breaking without the requirement to 'warm up', or bed in. Offering the rider with quiet, smooth braking these are great replacement pads, that perform equally as well in the wet, as they do in dry conditions

Model Compatibility:

Supplied with spring clips where applicable

Our range of MTB and Hybrid cycle pads and brake blocks use compounds that will give consistently high performance braking whilst not damaging wheel rims. Brake pads are compatible with all V-Brake/Cantilever brake systems.

Features:

• 55mm V type cantilever brake block 
• For linear pull brakes with non threaded posts

CNC engineered chainring manufactured from 7075 T6 grade alloy.

Features:

• High tensile strength Aluminium Alloy, reducing flex and power loss
• Narrow wide teeth prevent chain slip
  
• Compatible with 9-11 speed gear systems
• 104mm Bolt Centre Diameter
  
• Black
• Available in 30t, 32t, 34t, 36t and 38t 

Specifically designed for purpose, our range of Elite MTB/Hybrid pads and cartridges will ‘wipe’ dirt from the rim whilst delivering top performance braking power and consistency. Using CNC machined carriers combined with lightweight materials our brake pads will complement all of the top manufacturers braking systems whilst providing great stopping power. 

Features:

• Triple contour pad - for optimum braking in all conditions
• For linear pull brakes with threaded posts
• Aluminium carrier for weight reduction
• 70mm Length brake pad

Shimano compatible, budget rear cassette, ideal for Hybrid and weekend trail MTB bikes.

Features:

• Compatible with most 9 speed gear systems (excluding Campagnolo)
• Corrosion resistant steel
• Nickel plated for longevity
• Sprocket range - 11t, 13t, 15t, 17t, 19t, 21t, 24t, 28t, 32t
• Weight: 325g

Sintered cycle disc brake pads
Clarks sintered cycle disc brake pads use harder compound pad with increased carbon content. Sintered pads are designed to deliver maximum performance under stress and extreme conditions. Consistent through sustained riding they are ideal for hydraulic brake systems.

Model Compatibility:

Please note if you are purchasing for a Clarks M2, check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

Supplied with spring clips where applicable

A replacement set of Clarks brake inner wires for MTB an Hybrid bikes. Complete with 2 x end caps

All inner wires are supplied in generous lengths of 2275mm, long enough for front and rear brakes on all types of MTB bikes.

• 2 x MTB/Hybrid brake wires
• 2 x End caps
  
• Genuine Clarks inner wires

For Spring 2023 Clarks Cycle Systems have launched a new range of brake sets, under their new brand CRS - Clarks Race Series

The CRS C4 is a 4 piston hydraulic disc brake which provides the rider with a competition level brake set, featuring full adjustment and modulation. Each calliper has 4 x 16mm stainless steel self-adjusting pistons with machined piston heads for reduced friction operation. Heat dissipation features designed into the single piece CNC calliper, keep braking performance consistent and in-turn help to reduce pad wear. Lightweight 2 finger brake levers with ergonomic vented lever blades, offer controlled, sensitive braking by using an ‘on the fly’ lever reach adjustment screw. The C4  is supplied with aerospace grade aluminium floating rotors with stainless steel braking bands, hoses and mineral oil.

CRS C4 Specification:

• 4 Piston hydraulic brake system
• Suitable for MTB, downhill and e-bikes
• Rigid single piece CNC’d calliper
• Disc pad cooling fins
• High quality anodised black and gunmetal finish
• 4 x 16mm Self adjusting pistons
• 2 Finger vented ergonomic lever
• On the fly’ lever reach adjustment
• Mineral oil fluid to protect the environment
• Floating CNC stainless steel rotors with aluminium carriers
• Weight - 236g

Box Contents

• 1 x front lever and calliper
• 1 x Rear lever and calliper
• Hoses connected and pre-filled with mineral oil and pre-bled
• 1 x 180mm front rotor, 1 x 160mm rear rotor and torx head bolts
• 1 x 180mm front Post Mount calliper bracket and fitting bolts
• Spare olives and inserts for hose reduction or repair
• Finned semi-metallic pads (VRX801)
• Fitting and bleed instructions

CRS.bike - official website 

CRS C4 complies and exceeds EN 15194 regulations

Replacement disc pads (VRX801-FINNED) 

Organic cycle disc brake pads
Clarks organic cycle disc brake pads are specifically designed to give the best performance under normal conditions. The organic compound gives improved noise reduction as well as increased ‘bite’. Recommended for use with Mechanical Systems.

Model Compatibility:

Supplied with spring clips where applicable

Specifically designed for purpose, our range of Elite MTB/Hybrid pads and cartridges will ‘wipe’ dirt from the rim whilst delivering top performance braking power and consistency. Using CNC machined carriers combined with lightweight materials our brake pads will complement all of the top manufacturers braking systems whilst providing great stopping power. 

Features:

• Triple contour pad - for optimum braking in all conditions
• For linear pull brakes with threaded posts
• Aluminium carrier for weight reduction
• 70mm Length brake pad

2 sets (a bike set)

Our range of MTB and Hybrid cycle pads and brake blocks use compounds that will give consistently high performance braking whilst not damaging wheel rims. Brake pads are compatible with all V-Brake/Cantilever brake systems.

Features:

• 70mm V type cantilever brake blocks
• Threaded post for linear pull brakes

Organic cycle disc brake pads
Clarks organic cycle disc brake pads are specifically designed to give the best performance under normal conditions. The organic compound gives improved noise reduction as well as increased ‘bite’. Recommended for use with Mechanical Systems.

Model Compatibility:

Please note if you are purchasing for a Clarks M2, check the serial number found on the inside of the lever blade. Serial Letter 'L' uses a VX/VRX852, Serial letter 'O' uses a VX/VRX811 pad.

Supplied with spring clips where applicable

Gear inner wire. Compatible with all major manufacturers gear changers.
All inner wires are supplied in generous lengths of 2275mm, long enough front and rear changers on all types of bikes.

• Available in Stainless Steel, PTFE coated and galvanised.
• PTFE provides the rider with quicker more accurate shifting as the inner wire is virtually friction free.
• PTFE coated wire supplied with black end caps
• Stainless Steel wire is corrosion resistant.

CNC chainring manufactured from 7075 T6 grade alloy.

Features:

• High tensile strength Aluminium Alloy, reducing flex and power loss
• Narrow wide teeth prevent chain slip
• Compatible with 9-11 speed gear systems
• 94mm Bolt Centre Diameter
  
• Black
• Available in 30t, 32t, 34t, 36t and 38t 

Sintered cycle disc bake pads
Clarks sintered cycle disc pads use harder compound pad with increased carbon content. Sintered pads are designed to deliver maximum performance under stress and extreme conditions. Consistent through sustained riding they are ideal for hydraulic brake systems.

Model Compatibility:

Supplied with spring clips where applicable

The M3, delivers superior looks with an alloy cast radial style lever. Clarks have engineered out a large amount of weight from the brake system as well as drastically improving the overall aesthetics. The radial design lever increases the room available on the handlebar so creating a cleaner look on the bike. Calliper weight and aesthetics have also benefited from alloy casting as well as the systems ability to deal with heat build-up. The M3 uses 2 pistons per calliper, and with a large internal fluid capacity braking power is improved by 25% compared with the M2. The M3 will to appeal to many riders from leisure cyclists to the dedicated downhill rider.

Features:

• Radial style Flip Flop lever design
• Cast alloy lightweight design
• Removable handle bar clamp
• Lever reach adjustment
• High quality anodised finish
• One piece calliper design
• Mineral Fluid
• PM and IS compatible
• Weight - 224g

• Approved to BS EN 14766-2005 and ISO4210

Replacement rotor (Clarks CL-160)
Replacement disc pads (Clarks VRX852)

This set comes with the hoses connected, filled with mineral fluid and pre-bled. All ready to fit straight onto your bike. It also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 700mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, using the Royal Mail first class signed for delivery service.

Organic cycle disc brake pads
Clarks organic cycle disc brake pads are specifically designed to give the best performance under normal conditions. The organic compound gives improved noise reduction as well as increased ‘bite’. Recommended for use with Mechanical Systems.

Model Compatibility:

Supplied with spring clips where applicable

Sintered Finned Disc pads
Finned disc pads specifically designed for the CRS C4 brake set. These are a direct replacement for the original disc pads suppled with the brake set.

Sintered cycle disc brake pads use harder compound pad with increased carbon content. Sintered pads are designed to deliver maximum performance under stress and extreme conditions. Consistent through sustained riding they are ideal for hydraulic brake systems.

Model Compatibility:

Supplied with spring clips where applicable

For Spring 2023 Clarks Cycle Systems have launched a new range of brake sets, under their new brand CRS - Clarks Race Series

The CRS C2  is a 2 piston hydraulic disc brake which provides the rider with a powerful, strong brake set, featuring full adjustment and modulation. Each calliper has self-adjusting pistons with machined piston heads for reduced friction operation. Heat dissipation features designed into the rotor, work in conjunction with the calliper, to keep braking performance consistent and in-turn help to reduce pad wear. Lightweight 2 finger brake levers offer controlled, sensitive braking with lever reach adjustment and comfortable ergonomic lever blades. The C2  is supplied with aerospace grade aluminium floating rotors with stainless steel braking bands, hoses and mineral oil.

CRS C2 Specification:

• 2 Piston hydraulic brake system
• Suitable for MTB, downhill and e-bikes
• Rigid single piece CNC’d calliper
• High quality anodised black and gunmetal finish
• 2 x 22mm Self adjusting pistons2 Finger ergonomic lever
• Lever reach adjustment
• Mineral oil fluid to protect the environment
• Floating CNC stainless steel rotors with aluminium carriers
• Weight - 218g

Box Contents

• 1 x front lever and calliper
• 1 x Rear lever and calliper
• Hoses connected and pre-filled with mineral oil and pre-bled
• 1 x 160mm front rotor, 1 x 160mm rear rotor and torx head bolts
• Spare olives and inserts for hose reduction or repair
• Finned semi-metallic pads (VRX852)
• Fitting and bleed instructions

CRS.bike - official company website 

CRS  C2 Complies and exceeds EN 15194 regulations

Our range of MTB and Hybrid cycle pads and brake blocks use compounds that will give consistently high performance braking whilst not damaging wheel rims. Brake pads are compatible with all V-Brake/Cantilever brake systems.

Features:

• 70mm V type cantilever brake blocks
• Threaded post for linear pull brakes
• Pack of 25 pairs

Sintered cycle disc brake pads
Clarks sintered cycle disc brake pads use harder compound pad with increased carbon content. Sintered pads are designed to deliver maximum performance under stress and extreme conditions. Consistent through sustained riding they are ideal for hydraulic brake systems.

Model Compatibility:

Supplied with spring clips where applicable