Clarks Stainless steel brake and gear cable kits provide every cyclist with everything they need to replace all the control cables on their bike. Suitable or Road, MTB and Hybrid bikes they will provide great value maintenance free service. 

  Contents

• SP4 Outer casing
  
• 2P Outer casing
• 2 x Stainless steel gear wires
• 2 x Stainless steel brake wires with pear and barrel nipples
• 10 x Nylon push fit gear ferrules
• 10 x Nylon push brake fit ferrules
• 4 x wire end covers
  
• 4 x Rubber doughnuts

Specifically designed for purpose, this range of Elite MTB/Hybrid pads and cartridges will ‘wipe’ dirt from the rim whilst delivering top performance braking power and consistency. Using CNC machined carriers combined with lightweight materials our brake pads will compliment all of the top manufacturers braking systems whilst providing great stopping power.

Features:

• For linear pull brakes with threaded posts
  
• Triple compound for good performance in all conditions
• Top performance on dry and wet rims
  

Clarks Stainless steel brake and gear cable kits provide every cyclist with everything they need to replace all the control cables on their bike. Suitable or Road, MTB and Hybrid bikes they will provide great value maintenance free service. 

  Contents

• SP4 Outer casing
  
• 2P Outer casing
• 2 x Stainless steel gear wires
• 2 x Stainless steel brake wires with pear and barrel nipples
• 10 x Nylon push fit gear ferrules
• 10 x Nylon push brake fit ferrules
• 4 x wire end covers
  
• 4 x Rubber doughnuts

Colour - RED

The Clarks M4 their most powerful brake produced to date. Featuring the revised calliper design with 4 pistons per calliper, it applies more braking force to the rotor than any other Clarks M range of hydraulic brakes. Designed to meet the demands of downhill riders and e-bike riders and commuters who need more stopping power from their brakes. The M4 has a 2 finger ergonomic lever blade with reach adjustment, forged alloy callipers and uses mineral oil fluid.

Features:

• Lightweight hydraulic disc brake set
• Revised calliper design 
• Self adjusting 16mm pistons
• Powerful 4 Piston hydraulic brake calliper
  
• Mineral oil fluid
  
• Post mount calliper & international standard compatible
• 2 Finger lever with reach adjustment
  
• 180mm front rotor, 160mm rear rotor
• 180 post mount bracket included
  
• Weight 242g (rear calliper and lever)

• Approved to BEN 15194 regulations

This set comes with the hoses connected, filled with mineral fluid and pre-bled. All ready to fit straight onto your bike. It also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 800mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, using the Royal Mail first class signed for delivery service.

Replacement rotor (CL-160)
Replacement disc pads (VRX851)

Please note the packaging is a plain white box with labels applied. 

These top performance Elite range of pads are specifically designed for road bicycles. Brake blocks feature carriers manufactured from lightweight materials, using precision CNC engineering. Combined with non-abrasive brake compounds they will perform in all conditions and on all performance engineered braking surfaces without causing damage to rims.

Features:

• Integral brake block, with angle adjustment wing
  
• Large wing design creates efficient water displacement
  
• Top performance on wet and dry rims
  

A ‘classic’ design, this rotor is lightweight and extremely strong. 

Features:

• Carrier constructed of Alloy 7075 aerospace grade
• Stainless steel braking band
• Invulnerable to warp

Weights:

• 180mm - 118g
• 203mm - 123g

Clarks Stainless steel brake and gear cable kits provide every cyclist with everything they need to replace all the control cables on their bike. Suitable or Road, MTB and Hybrid bikes they will provide great value maintenance free service. 

  Contents

• SP4 Outer casing
  
• 2P Outer casing
• 2 x Stainless steel gear wires
• 2 x Stainless steel brake wires with pear and barrel nipples
• 10 x Nylon push fit gear ferrules
• 10 x Nylon push brake fit ferrules
• 4 x wire end covers
  
• 4 x Rubber doughnuts

Colour - WHITE

Clarks Stainless steel brake and gear cable kits provide every cyclist with everything they need to replace all the control cables on their bike. Suitable or Road, MTB and Hybrid bikes they will provide great value maintenance free service. 

  Contents

• SP4 Outer casing
  
• 2P Outer casing
• 2 x Stainless steel gear wires
• 2 x Stainless steel brake wires with pear and barrel nipples
• 10 x Nylon push fit gear ferrules
• 10 x Nylon push brake fit ferrules
• 4 x wire end covers
  
• 4 x Rubber doughnuts

Colour - BLACK 

Lighter weight strong floating rotor with wide stainless steel 120cr braking band and aluminium alloy 7075 carrier

Features:

• Carrier constructed of Alloy 7075 aerospace grade alloy
• Stainless steel braking band
• Virtually invulnerable to warp

Clarks PTFE cable kits come loaded with the latest technology in both design and materials to provide the ultimate performance, using PTFE pre-treated wires massively reduces the friction between the wire and liner giving an all-round smoother operation. The PTFE coating also helps to protect the wire against the weather elements further extending its longevity.

Features

• PTFE treated inner wires: Equipped with pre-lubricated PTFE INNER WIRES to further reduce friction and wear, providing smooth and reliable operation.
• Weather-Resistant Coating: The PTFE coating not only ensures smooth operation but also provides an additional layer of protection against weather elements, extending the wire's lifespan.
• Complete Kit Components: Includes everything needed for installation—outer casing, inner wires, ferrules, and crimp-on wire end covers.
• Versatile Compatibility: Suitable for all types of bikes and compatible with most braking and shifting systems.

Contents

• SP4 Outer casing
• 2 x PTFE coated gear wires,
• 8 x Alloy CNC machined ferrules
• 2 x Rubber frame protectors
• 2 x ED black wire end covers
• 2 x Rubber doughnuts