Clarks HD-M3000 Plus E-bike Hydraulic Brake Set - Frame Routing

Dual Pistons - Open Hydraulic System E brake for Electric bikes, with sensor control design cutting line. Designed for use on 45km/hr E-bikes, it consists of a 2 piece forged calliper allowing internal maintenance, the brake is specifically designed for use with E-bikes and has an automatic motor shut off when the brake lever is applied resulting in safe braking. Sensor Control waterproof contact, 3 fingers lever length.

Levers are not connected, so that hoses can be internally routed. Levers and hoses are capped so that they can be connected without the need for bleeding.

Features;
• Designed for use on 45km/hr E-bikes
• 160mm Front and 160mm rear rotors with 180mm front option
• Lightweight 2 piston hydraulic brake system
• Motor shut off sensor to give greater control
• Fitted with motor cut off. Juliet Male 8 (2 pin) connector
• 3/4 Finger lever
• Lever reach adjustment to suit all hand sizes
• Post mount fit
• Mineral oil fluid to protect the environment
• Stainless steel rotors
• Spare olives to allow for hose reduction
• Weight - 320g

Complies with and exceeds EN15194 and ISO4210 regulation

This set comes with the hoses connected to the callipers, filled with mineral fluid and pre-bled. Levers and calliper hose are capped off, so that the hoses can be routed through a frame, or reduced in length - as required. When fitted carefully, no bleeding will be required. The set also includes all the bolts and fittings you will need, as well as 2 spare olives should you wish to reduce or replace the hoses.

Front hose length is 800mm and Rear hose length is 1800mm.
This is a UK specification set, front brake/right hand lever, rear brake/left hand lever.

We deliver all our brake sets as standard, using 3/4 day tracked delivery service.

Replacement rotor (CL027-160 / 180)
Replacement disc pads (VRX811)

Please note packaging is a plain white box with labels applied